pot shafts and knobs for MK V

Post Reply
User avatar
TheEHMan
Regular Member
Posts: 31
Joined: Sat Jul 31, 2010 3:13 pm
Location: Indiana
Contact:
Contact TheEHMan

pot shafts and knobs for MK V

Postby TheEHMan » Fri Oct 04, 2013 7:42 am

What shafts do I need on the pots for my MK V project? Also, which knobs would be correct?
Ron Neely II
The EH Man, All-Knowing Guru of Electro-Harmonix
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com
Home of RonSound effects: http://www.ronsound.com
fx schematics and repairs
Top
Mr. Bill
Top Producer
Posts: 678
Joined: Tue Aug 19, 2008 12:15 pm
Location: Chicago, IL
Contact:
Contact Mr. Bill

Re: pot shafts and knobs for MK V

Postby Mr. Bill » Fri Oct 04, 2013 9:41 am

Split shaft Centralab pots, 300K with a 0.05uF ceramic cap. The knobs would be the taller standard Mosrite knobs, one marked with a V and one with a T.

Have you searched the forum here for info? There are a lot of posts regarding the Mark V and the pickups and the pots and the etc.
Top
User avatar
Dennisthe Menace
Moderator
Posts: 4981
Joined: Mon May 05, 2008 8:40 pm
Location: Ft Lauderdale Florida
Contact:
Contact Dennisthe Menace

Re: pot shafts and knobs for MK V

Postby Dennisthe Menace » Fri Oct 04, 2013 1:05 pm

Mr. Bill wrote:Split shaft Centralab pots, 300K with a 0.05uF ceramic cap. The knobs would be the taller standard Mosrite knobs, one marked with a V and one with a T........

Actually the taller knobs have just the numbers on them....FWIW..... ;)
make the Mos' of it, choose the 'rite stuff.
.........Owner of 9 Mosrites...
.....proud owner and documented:
1963 "the Ventures" Model s/n #0038
http://www.thevintagerockproject.com/
Top
Mr. Bill
Top Producer
Posts: 678
Joined: Tue Aug 19, 2008 12:15 pm
Location: Chicago, IL
Contact:
Contact Mr. Bill

Re: pot shafts and knobs for MK V

Postby Mr. Bill » Fri Oct 04, 2013 6:59 pm

My bad. I probably should have looked a set of knobs before posting. Thanks for the correction.
Top
User avatar
TheEHMan
Regular Member
Posts: 31
Joined: Sat Jul 31, 2010 3:13 pm
Location: Indiana
Contact:
Contact TheEHMan

Re: pot shafts and knobs for MK V

Postby TheEHMan » Mon Oct 07, 2013 5:33 am

Thanks for your help! Looks like Bob Shade at Hallmark has every part I need for this project!
Ron Neely II
The EH Man, All-Knowing Guru of Electro-Harmonix
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com
Home of RonSound effects: http://www.ronsound.com
fx schematics and repairs
Top
Post Reply

Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”

Who is online

Users browsing this forum: No registered users and 56 guests