I want to replace the 5 way switch with a 3 way switch and wire the neck and bridge pickup like a tele. I than want to have either a mini toggle or one of the pots to connect the middle pickup to the bridge pickup in SERIES. Is there any way to do this? Does anyone have a schematic?
Thanks.
Is this wiring possible on a strat?.....
-
- Regular Member
- Posts: 12
- Joined: Sun Jun 19, 2011 4:54 pm
- Contact:
-
- Top Producer
- Posts: 678
- Joined: Tue Aug 19, 2008 12:15 pm
- Location: Chicago, IL
- Contact:
Re: Is this wiring possible on a strat?.....
Yes, that should be fairly simple to do. Wire the neck and bridge just like a tele.
Take the ground wire from the bridge pickup and connect it to the hot of the middle pickup. Take this same connection and either connect it to one side of the toggle switch or to the CCW side of the pot. Then wire the other toggle switch side or the wiper of the pot to ground.
When the switch or the pot grounds the connection between the middle and bridge pickup it will turn off the middle pickup.
Take the ground wire from the bridge pickup and connect it to the hot of the middle pickup. Take this same connection and either connect it to one side of the toggle switch or to the CCW side of the pot. Then wire the other toggle switch side or the wiper of the pot to ground.
When the switch or the pot grounds the connection between the middle and bridge pickup it will turn off the middle pickup.
- panther
- Top Producer
- Posts: 817
- Joined: Tue May 03, 2011 8:31 pm
- Location: Anza, California
- Contact:
Re: Is this wiring possible on a strat?.....
I have an aftermarket Strat, that The guy I bought it from modified it in exactly the way you describe. I will open it up and take some photos. I have a small toggle switch on the pickguard.
Dan
Dan
"The More People I Meet, The More I Miss My Dog"
-
- Regular Member
- Posts: 12
- Joined: Sun Jun 19, 2011 4:54 pm
- Contact:
Re: Is this wiring possible on a strat?.....
Thanks for the info guys.....actually, I'm wondering now if its possible to keep the 5 way switch and have position 2 be the middle and bridge in series and position 4 be the bridge and neck. That would give me the combinations I want plus the middle alone. Someone told me its impossible to do series on the 5 way switch.
- panther
- Top Producer
- Posts: 817
- Joined: Tue May 03, 2011 8:31 pm
- Location: Anza, California
- Contact:
Re: Is this wiring possible on a strat?.....
Wagon train;
If you check this site out, they have every possible wiring combination. Scroll down pick your instrument and type wiring, they provide a diagram. And it's free.
Dan
http://www.guitarelectronics.com/
If you check this site out, they have every possible wiring combination. Scroll down pick your instrument and type wiring, they provide a diagram. And it's free.
Dan
http://www.guitarelectronics.com/
"The More People I Meet, The More I Miss My Dog"
-
- Regular Member
- Posts: 12
- Joined: Sun Jun 19, 2011 4:54 pm
- Contact:
Re: Is this wiring possible on a strat?.....
Thanks a lot Dan. I'm fairly new to strats and just getting into exploring all the wiring tricks and mods. That link seems like just what I needed. I just can't get into the 2 and 4 positions and wanna try some alternatives. Thanks a lot.
Return to “Other Instruments, Equipment, Accessories & Projects”
Who is online
Users browsing this forum: No registered users and 48 guests