style" mosrite of burgundya"

[ludobag]

i try to arrange it will stay like this need to sand to 2OOO

[TerryTNM]

You have incredible determination. Your name in relief. . . what an effort. Salute! All it takes is a lot of time and talent.

[ludobag]

thanks
need the finishing but the harder is done ,tomorrow i stay cool i look at my plan to make my template for making wood chips, cause i didn't feel my arms anymore

[mikethemod1992]

amazing work

[ludobag]

now we can say it is finish








there some scratch again but the time need to made the guitar for i have time to polish it a little more (and it is diy if it is too much perfect nobody trust you )
tomorrow templating and wood
i have again the base for the bridge,the roller string t,the neckplate to do but at this time i am fed up with aluminium need to make wood chips

[Veenture]

très beau

[FritzCat]

Make sure you turn the bridge around so that the screw heads are away from the pickup, otherwise it'll be difficult to adjust the intonation.

[TerryTNM]

I would have expected your hands to be much blacker than they are. . . hours on the buffing wheel with aluminum can get pretty messy. Hardly see a trace!

-Terry

[customxke]

I tip my hat to you. Awesome work!

[ludobag]

thanks
i have wear glove and in fact i have only sand it to 6oo grit wet and after i use belgom
(it is a product for motorcycle) by hand (work pretty well but it is like all conpound the more you apply on it the more it work)
i have a little buffing wheel with 2 kind of grit but it will wait cause this make too much dirt ,i have cleaned the garage yesterday for wood working (there is lot of aluminium chips everywhere and i refind some always )
i will resand it a little later maybe to 8oo or 1OOO but not too much hight cause the more you sand it with little grit the more you see scratch then the more you sand ect....
up to 1500 all is visible then after it is all days to sand (moreover i do it by hand)
now i am doing the wood working and i will see how it turn if it tarnish ect .....

what kind of screws to attach the trem to the body ?(3mm dia ,longer ?)
seems the post for the bridge are not needed cause of the thread in the baseplate
and i will remember to put screw behind for easy set up (but the bridge is symmetric then it is easy to return it )