Mosrite owner from Melbourne Australia

murrayhex
New Member
Posts: 2
Joined: Thu Jun 28, 2012 7:53 pm
Location: Australia
Contact:

Mosrite owner from Melbourne Australia

Postby murrayhex » Thu Jun 28, 2012 9:35 pm

Hi everybody. Murray from Melbourne here. I own a couple of 70's Mosrites, one a bluesbender that I use for playin live and Ventures model. Came across this forum coz I was trying to work out how to lock off the tremolo on my ventures model so I can use that live as well. I use different tunings for a couple of songs which is a pain with the tremolo. Noticed their was a rare Johnny Ramone model with a tailpiece similar to the Mosely tremolo tailpiece but without a tremolo. Anyone know if you can buy these tailpieces somewhere or know of a non destructive mod I could make to the Mosely tremolo to lock it off. Probably a post for a different section but thought I may as well throw it out there while I'm here. All the best.

User avatar
dubtrub
Administrator
Posts: 3795
Joined: Sun May 04, 2008 10:12 am
Contact:

Re: Mosrite owner from Melbourne Australia

Postby dubtrub » Thu Jun 28, 2012 10:34 pm

Welcome to the forum!

As for locking off the vibrato, I've seen guitars with the spring removed and a chrome socket of similar size inserted in it's place. It's non intrusive and easily reversible.

Image
Danny Ellison

FrankJames
Top Producer
Posts: 575
Joined: Wed Oct 26, 2011 12:55 pm
Location: Ohio, USA
Contact:

Re: Mosrite owner from Melbourne Australia

Postby FrankJames » Fri Jun 29, 2012 10:52 am

Welcome to the forum !!

User avatar
Veenture
Master Contributor
Posts: 4127
Joined: Sat Jan 03, 2009 12:07 pm
Location: The Netherlands
Contact:

Re: Mosrite owner from Melbourne Australia

Postby Veenture » Fri Jun 29, 2012 11:59 am

Hi Murray, good luck locking down your trem. My recently bought MIJ Mosrite had a socket like Danny describes. Because I like to use a trem, I removed the socket (7/16th) and fitted a new coil spring that has just the right tention. No worries about keeping her in tune. Welcome aboard. ;)

stl80
Top Producer
Posts: 820
Joined: Thu Dec 24, 2009 9:36 am
Location: Seattle, Washington
Contact:

Re: Mosrite owner from Melbourne Australia

Postby stl80 » Mon Jul 02, 2012 7:20 am

Welcome.
Jim

User avatar
mrmomo
Senior Member
Posts: 149
Joined: Thu Jan 12, 2012 2:10 pm
Location: Delaware
Contact:

Re: Mosrite owner from Melbourne Australia

Postby mrmomo » Mon Jul 02, 2012 8:44 pm

Welcome up here (from down under), Murray!

-John
John Drysdale | Surf Guitarist - Mentor - Instructor | John Drysdale Music
Web Sites: http://www.johndrysdalesurfguitar.com | http://www.johndrysdalemusic.com

murrayhex
New Member
Posts: 2
Joined: Thu Jun 28, 2012 7:53 pm
Location: Australia
Contact:

Re: Mosrite owner from Melbourne Australia

Postby murrayhex » Sat Jul 21, 2012 6:09 pm

Thanks for the advice on the tremolo issue. I'll give the socket idea a shot


Return to “INTRODUCTION: Please Start Here”

Who is online

Users browsing this forum: No registered users and 68 guests