The New E.F.Elliott "RS Model" Guitars

User avatar
JimPage
Top Producer
Posts: 984
Joined: Thu Jul 30, 2009 11:26 am
Location: Washington DC Metro Area
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby JimPage » Wed Mar 31, 2010 5:21 pm

Hey--

This is an interesting discussion. I hope some more folks chime in about muting a guitar.

I have never mastered palm muting on a guitar, or had a GUITAR with a built-in mute. I used to have an Epiphone Rivoli bass with a mute back in the late 1960s, and I have a piece of foam rubber muting the '51 Reissue Precision bass of mine all the time. I like the thunk of a muted flatwound string on a bass.

But I have never considered a guitar-mute device. I can see where it might be useful, especially as Mel describes it.

Playing rhythm guitar in my Bakersfield-country band, I am called upon to mute sometimes, and I usually make a hash of it.

--Jim
Image
• '99 Martin D-41
• '67 Mosrite Celebrity II
• '72 Mosrite Celebrity III
• '83 Tokai TST56
• '10 Hallmark Barris Krest
• '10 Hallmark 60 Custom
• '10 Hallmark Stradette
• '50s Tele Clone
• Basses: Ashbory, Hofner, 51RI Precision, 5-string, fretless

User avatar
MWaldorf
Site Admin
Posts: 3264
Joined: Sat May 24, 2008 1:21 pm
Location: Alameda, California
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby MWaldorf » Wed Mar 31, 2010 6:18 pm

The aluminum bridge makes the guitar brighter, but it's not suddenly a Fender. It's similar to the difference of picking a roller bridge guitar over the bridge pickup pole pieces vs between the bridge pickup and the bridge. Personally I like it.

The mute on a Fender Jaguar does a better job of actually muting. I think the thickness of the mute foam pad and the spring loaded pressure on the strings are the key factors. Of course, it's also far more likely to push the guitar sharp. My guess is that with a softer material on the Mosrite mute would make it more effective.

I know some Gretsches also had mutes on them, but I've never had the chance to try one to see how well it works.
Oy vey - it's MESHUGGA BEACH PARTY - The world's premier Jewish Surf Music Band!

Image

What? Couldn't tell the logo is a link? So click here, what's the hold up? http://www.meshuggabeachparty.com

User avatar
EFElliott
Top Producer
Posts: 502
Joined: Fri Jun 20, 2008 8:35 pm
Location: Checotah, Oklahoma USA
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby EFElliott » Wed Mar 31, 2010 7:55 pm

Hey Mel,

What type of material if the pad on your mute made of??
I've been using an automotive weather stripping
It sticks well to the aluminum and it's nice and softh and spongie.
Just today in a little hardware store I found some 1/4"
black felt material with a strong adhesive backing.
Going to experiment on a couple "String Dampeners" tomorrow.
I think Mel might be on to something.
I like the name "String Dampener" better than "Flip Mute"
and it's actully what the divise dose, it dampens.

Ed

twango the clown
Active Member
Posts: 55
Joined: Sun Feb 21, 2010 6:38 pm
Location: Massachusetts
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby twango the clown » Thu Apr 01, 2010 9:20 pm

Well, if you want to talk 'string dampener,' I don't even need a guitar for that! I've got two string dampeners growing out of my wrists.
My hands ooze a caustic fluid like the stuff that drools off The Alien, and strings just melt like an evanescent frost...
Maybe someone could design a guitar with little gym towels that come up at the touch of a finger and swab your hands dry.
While we're trying out new names for Ed's marvelous new guitar, here's my suggestion for the RS Student model: The One.
To me this guitar looks perfect as is, and the little do-hickey bridge attachment is an endearing touch of kitsch,(Did I spell that right?) however well it works. That whole bridge assembly has tons of style. When I see this guitar, it makes me think of other minimalist icons: LP Jr., Esquire, Streamliner, ES-125 et cetera, and it more than holds its own in that company.
And try to imagine that figured maple neck, so much more functional and pretty than the mahogany original!

User avatar
Veenture
Master Contributor
Posts: 4127
Joined: Sat Jan 03, 2009 12:07 pm
Location: The Netherlands
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby Veenture » Fri Apr 02, 2010 12:28 am

twango the clown wrote:Well, if you want to talk 'string dampener,' I don't even need a guitar for that! I've got two string dampeners growing out of my wrists.

:lol: :lol: :lol:

User avatar
gman
Regular Member
Posts: 24
Joined: Thu Feb 25, 2010 10:43 am
Location: United Kingdom
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby gman » Fri Apr 02, 2010 1:27 am

JimPage wrote:I have never mastered palm muting on a guitar,


I'm quite curious about this.
    How do you pick? (pick, fingers .. . etc)
    How high do you wear your guitar? (on a scale from Vernon Reid to Johnny Ramone)
    How tall are you?
... these all give me an idea of the geometry of your hand-arm-guitar-body
    Acoustic/electric?
    What volume do you play at? clean overdriven
    What guitar are you playing (should I have to ask this on this board?)
. . . what goes wrong when you mute?

User avatar
JimPage
Top Producer
Posts: 984
Joined: Thu Jul 30, 2009 11:26 am
Location: Washington DC Metro Area
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby JimPage » Fri Apr 02, 2010 6:05 am

Hey, gman--

Thanks for the assistance! There's nothing unusual about my playing or how my mechanics are when I play. I prefer a clean sound for the stuff I play, and I don't play too loud, as I am generally playing rhythm guitar parts.

Again, in the two bands I'm in, we play Bakersfield country or rockabilly/classic rock. My guitars are listed below and I rotate through the Mosrite and the two Hallmarks in these bands. The Martin D-41 is generally reserved for acoustic jam sessions.

The issue is that my palm muting seems-- to me-- to be a little heavy handed. I sometimes feel as though I might be muting too much.

What I probably need to do is just practice it more. One of the fellows I play with is a jazz-guitar whiz, college trained, and he is my go-to guy for technical guidance. I may mention the situation to him and report back as to what his response is.

I'll let you know! I was at his place last night, and, probably due to tiredness on my part, I just played terribly. I was playing bass in the Bakersfield ensemble at this practice, and my bass playing is too busy for that kind of music. So I am having to re-learn to keep it extremely simple and in the pocket.

It's all good, and that is one thing wonderful about playing these instruments: There is always more to learn and to develop!

--Jim
Image
• '99 Martin D-41
• '67 Mosrite Celebrity II
• '72 Mosrite Celebrity III
• '83 Tokai TST56
• '10 Hallmark Barris Krest
• '10 Hallmark 60 Custom
• '10 Hallmark Stradette
• '50s Tele Clone
• Basses: Ashbory, Hofner, 51RI Precision, 5-string, fretless

jfine
Top Producer
Posts: 391
Joined: Sun Nov 08, 2009 2:41 am
Location: Vallejo, CA and Springfield, OH
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby jfine » Sun Apr 04, 2010 2:03 am

"Palm-muting" is kind of a nisnomer as you don't actually use your palm--you use the heel of your picking hand. Rest the heel of your hand lightly on the bridge where the strings cross it--it may take some experimentation to find the precise spot. Too far back and you'll get no mute at all, too far forward and you'll get too much click and not enough note. I find that it's easier when I wear the guitar up a little higher, and it's also more comfortable on a guitar with a higher bridge, like a Mosrite or a Gibson, but it's doable on flatter-bridged guitars like Fenders too--it may just take some getting used to.

User avatar
JimPage
Top Producer
Posts: 984
Joined: Thu Jul 30, 2009 11:26 am
Location: Washington DC Metro Area
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby JimPage » Sun Apr 04, 2010 8:39 am

Okay, Jon: What you wrote so concisely was EXACTLY what I needed to hear. Now I've got it.

For some reason, other folks' explanations didn't get the point across to me like your explanation did. Maybe the "palm" portion of the description was what was throwing me. I was turning my right hand so that the palm engaged the strings, and that just didn't work right.

After reading your post, I just spent half an hour doing old Motown and Stax stuff, using that palm-muting technique as you described it, and it worked exactly like I wanted it to; very controllable.

I owe you one! THANKS!!!

--Jim
Image
• '99 Martin D-41
• '67 Mosrite Celebrity II
• '72 Mosrite Celebrity III
• '83 Tokai TST56
• '10 Hallmark Barris Krest
• '10 Hallmark 60 Custom
• '10 Hallmark Stradette
• '50s Tele Clone
• Basses: Ashbory, Hofner, 51RI Precision, 5-string, fretless

User avatar
arpsum
Active Member
Posts: 86
Joined: Mon May 12, 2008 9:03 pm
Location: Japan
Contact:

Re: The New E.F.Elliott "RS Model" Guitars

Postby arpsum » Mon Apr 05, 2010 11:50 pm

I've just received Eddy's masterpiece. I'm so surprised to play with it. It's so easy to play and sounds so good! Hi Eddy, you're the best luthier I've ever met.

Image


Return to “Modern Mosrites & Clones”

Who is online

Users browsing this forum: No registered users and 28 guests