Need Bridge Screws

[Desert Surfer]

Thanks Dennis.

Zamminc, isn't that Kevin? Is Mark the new guy?

[Dennisthe Menace]

Thanks Dennis.

Zamminc, isn't that Kevin? Is Mark the new guy?

My error Vincent, it is Kevin ......

[dubtrub]

All the stuff that Kevin Zamm has is metric.

[Dennisthe Menace]

Revised:

Hey Folks, has anyone checked with:

1) Artie at Front Porch Music
2) Bob Shade (HALLMARK)
3) Terry (TNM)
4) Tyms Guitars
5) Andy (MosritePartsNo1)
6) EF Elliott

And I'm sure I left out somebody, just can't
think of them at the moment...........

[mark1]

I needed some for a U.S Mosrite.These are the screws used for intonation.I got them through the local True Value Hardware store. A box of 30 screws for about $12.00 or so,not sure. Fillister phillips MS...size 6-32 x 1" ( don't know what the MS means).The guy at the store measured them and had to look them up but a week later I had exact match screws to the original, not metric!

[dubtrub]

I needed some for a U.S Mosrite.These are the screws used for intonation.I got them through the local True Value Hardware store. A box of 30 screws for about $12.00 or so,not sure. Fillister phillips MS...size 6-32 x 1" ( don't know what the MS means).The guy at the store measured them and had to look them up but a week later I had exact match screws to the original, not metric!

The MS stands for Machine Screw. They come in SM sheet metal screws, W wood screw etc.

[Dennisthe Menace]

I needed some for a U.S Mosrite.These are the screws used for intonation.I got them through the local True Value Hardware store. A box of 30 screws for about $12.00 or so,not sure. Fillister phillips MS...size 6-32 x 1" ( don't know what the MS means).The guy at the store measured them and had to look them up but a week later I had exact match screws to the original, not metric!

The MS stands for Machine Screw. They come in SM sheet metal screws, W wood screw etc.

Well, that's a relief I had MS= Mosrite Screws, Metric Size, Mosrite Size, Mini Screws, Metric Screws...J/K