First mosrite
-
- Top Producer
- Posts: 434
- Joined: Wed Feb 10, 2010 10:19 am
- Location: Ortonville Mi
- Contact:
First mosrite
Hi guys, need some help. Is it possible to get some paper traceings from one of the members out their of the body, neck, and tuning head of a mosrite? I'ed like to try and make one. Found a thred with a cad cam drawing of one but cant seem to copy it, my printer may not be new enough. Appreciate any help I can get.
- Olav
- Top Producer
- Posts: 321
- Joined: Tue Aug 04, 2009 3:34 am
- Location: Öckerö's loge
- Contact:
Re: First mosrite
There's templates for sale on eBay or at http://www.guitarbuildingtemplates.com
Easy as 1-2-3
http://www.guitarbuildingtemplates.com/Mosrite.jpg
What's the extention on the file you have? What format? Link to the thread?
Easy as 1-2-3
http://www.guitarbuildingtemplates.com/Mosrite.jpg
What's the extention on the file you have? What format? Link to the thread?
va' sa' du? va' hete' du?
my guitars @ LGTf
Official Member of the GUN Guitar Owners Association
my 2011TDPRI entry
my guitars @ LGTf
Official Member of the GUN Guitar Owners Association
my 2011TDPRI entry
-
- Top Producer
- Posts: 434
- Joined: Wed Feb 10, 2010 10:19 am
- Location: Ortonville Mi
- Contact:
Re: First mosrite
Hay Olav, don't think weve conversed before, hope this is what you need, it's under MOSRITE PROJECTS, PARTS AND ACCESORIES PAGE 6 MOSRITE VENTURES II CAD MODEL EVENTUAL PDF DRAWING.
- Olav
- Top Producer
- Posts: 321
- Joined: Tue Aug 04, 2009 3:34 am
- Location: Öckerö's loge
- Contact:
Re: First mosrite
Now, the file you got there is a .pdf which a local 'printshop' should be able to print fullsize for a couple bucks.
Good luck!
Good luck!
va' sa' du? va' hete' du?
my guitars @ LGTf
Official Member of the GUN Guitar Owners Association
my 2011TDPRI entry
my guitars @ LGTf
Official Member of the GUN Guitar Owners Association
my 2011TDPRI entry
-
- Top Producer
- Posts: 434
- Joined: Wed Feb 10, 2010 10:19 am
- Location: Ortonville Mi
- Contact:
Re: First mosrite
They can do that? What doI have to tell them to print that? Sure would save a whole lot of time on the drafting table. 

-
- Top Producer
- Posts: 434
- Joined: Wed Feb 10, 2010 10:19 am
- Location: Ortonville Mi
- Contact:
Re: First mosrite
Well, all is alrite in my little world of mosrite's, cut the blank today, and start the carve tommrow. Are you intrestead in seeing pictures of the build? if so let me know and I'll make it happen. 

- Veenture
- Master Contributor
- Posts: 4127
- Joined: Sat Jan 03, 2009 12:07 pm
- Location: The Netherlands
- Contact:
Re: First mosrite
If you can find the time, please do woodchuck30...you never know, perhaps we can even help you with your build along the waywoodchuck30 wrote:Are you intrestead in seeing pictures of the build? if so let me know and I'll make it happen.


- oigun
- Top Producer
- Posts: 437
- Joined: Thu Jan 07, 2010 3:48 pm
- Location: Netherlands
- Contact:
Re: First mosrite
woodchuck30 wrote:Well, all is alrite in my little world of mosrite's, cut the blank today, and start the carve tommrow. Are you intrestead in seeing pictures of the build? if so let me know and I'll make it happen.
YES!! we love to see pictures

- Olav
- Top Producer
- Posts: 321
- Joined: Tue Aug 04, 2009 3:34 am
- Location: Öckerö's loge
- Contact:
Re: First mosrite
woodchuck30 wrote:Well, all is alrite in my little world of mosrite's, cut the blank today, and start the carve tommrow. Are you intrestead in seeing pictures of the build? if so let me know and I'll make it happen.
No we're not interested in seeing pics of your build... WHAT?
Announcing a build thread or NewGuitarDay without pics is considered illegal on most boards and results in nagging for pix (sometimes even bans!).
Consider this your first and only warning!

va' sa' du? va' hete' du?
my guitars @ LGTf
Official Member of the GUN Guitar Owners Association
my 2011TDPRI entry
my guitars @ LGTf
Official Member of the GUN Guitar Owners Association
my 2011TDPRI entry
- oigun
- Top Producer
- Posts: 437
- Joined: Thu Jan 07, 2010 3:48 pm
- Location: Netherlands
- Contact:
Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”
Who is online
Users browsing this forum: No registered users and 59 guests