Hello there fellow Mosrite fans!
Well, I've built Original Mosrites with my ol' friend and mentor Semie Moseley, and custom Mosrite style clones in my own shop for many years and I've never done any step-by-step photos of any of my projects, in fact dozens of my guitars have gotten away without a single photo, so you're going to see it here first, on the Mosrite Forum, Step-by-step photos of the hand-building process of four of my E.F.Elliott Custom Mosrite style guitars. I'm going to be building two '59 Joe Maphis customs and two '63 Ventures style custom guitars.
Administrators note: Simply click on on each topic for a pictorial guide through the process. If you have any questions or comments about a particular step, the individual topics are posted elsewhere in this projects forum and you can post you questions/comments directly to that particular step of construction.
Set #1 Preparing boards for the bodies
Set #2 mark the profiles & sawing out the bodies
Set #3 Routing the body blanks
Set #4 German Carving & attaching binding
Set #5 Triming the binding & finsh body sanding
Set #6 Building the necks & finger boards
Set #7 Sawing neck profile & drilling tuning peg holes
Set #8 Sawing fret slots and installing frets
Set #9 Installing neck trim, position markers & string guide
Set #10 Final shaping of necks & fitting to bodies
Set #11 Building trussrods, attaching necks, routing pickup
Set #12 Preparation and painting
Set #13 Finish painting and silk screen logo
Set #14 Vibrato rough cast parts
Set #15 Cleaning up rough castings & polishing paint
Step #16 Installing tuners to finished product
Step #17 Finished '59 Mosrite clone
1 post • Page 1 of 1
Users browsing this forum: No registered users and 31 guests