I put some 0.10 on the Ranger,but I wander to go 0.11 ,are there no problem.
The E slot seems to be made for 0.10.
are the -excellent-different stuff ?
thanx Bruno
strings gauge-Ranger-Excellent
-
- Senior Member
- Posts: 112
- Joined: Sat Aug 23, 2008 9:36 am
- Location: Italy
- Contact:
- FritzCat
- Top Producer
- Posts: 269
- Joined: Sun May 04, 2008 5:52 pm
- Location: Sonoma, CA
- Contact:
Re: strings gauge-Ranger-Excellent
I put 11's on my Excellent and like it better than 10's. I did have to play around with the spring, as the higher tension would pull the arm too close to the body for my liking.
-
- Senior Member
- Posts: 112
- Joined: Sat Aug 23, 2008 9:36 am
- Location: Italy
- Contact:
- Chemo
- Top Producer
- Posts: 226
- Joined: Thu Aug 28, 2008 3:44 am
- Location: Kirkkonummi, Finland
- Contact:
Re: strings gauge-Ranger-Excellent
brunob wrote:which spring size will be good for 0.11?
thanx Bruno
The original spring that came with my Ranger is just fine with 11-set. You could just try & change the strings and see how the arm settles.
It will be a good idea to do this before you take your guitar to the pro, so you'll have the setup made for the right gauge...
This concludes my report from outer space. Now, back to studio!
Return to “Modern Mosrites & Clones”
Who is online
Users browsing this forum: No registered users and 52 guests