New member in MN with BG-500
-
- New Member
- Posts: 2
- Joined: Mon Jul 09, 2012 10:16 am
- Location: Minnesota
- Contact:
New member in MN with BG-500
Hi all. I just brought home an amp last night that I got from a friend and as it turns out it is a Mosrite BG-500! I had never heard of it before so I started doing some research and came across this forum. It seems to work fine and is in excelent condition except it is missing the metal frame that came with. It is also missing the foot switch so I cannot access the Fuzzrite function. Does anyone know if there is a way to turn on the Fuzzrite without the foot switch? I found the schematic so I should be able to make one. The connector for the foot switch on the amp looks like a microphone plug, does anyone know if it is the same as a standard microphone plug? I am very excited to learn more about this very cool amp. I will upload a picture if I can figure out how...
-
- Top Producer
- Posts: 678
- Joined: Tue Aug 19, 2008 12:15 pm
- Location: Chicago, IL
- Contact:
Re: New member in MN with BG-500
Welcome to the place.
Based on the schematic, unless you want to try and short two of the pins together on the foot switch jack, there is no way to turn on the Fuzzrite without an external switch. The pins that turn on the Fuzzrite are actually turning on a small relay inside the amp. Be careful if you do try shorting the pins together, as there is 30 volts dc from the power supply on one of them.
As far as I know, it is a standard xlr jack with 4-pins. Ampeg and Kustom used these jacks and plugs on their amps as well, and I know that they are still available.
Based on the schematic, unless you want to try and short two of the pins together on the foot switch jack, there is no way to turn on the Fuzzrite without an external switch. The pins that turn on the Fuzzrite are actually turning on a small relay inside the amp. Be careful if you do try shorting the pins together, as there is 30 volts dc from the power supply on one of them.
As far as I know, it is a standard xlr jack with 4-pins. Ampeg and Kustom used these jacks and plugs on their amps as well, and I know that they are still available.
-
- New Member
- Posts: 2
- Joined: Mon Jul 09, 2012 10:16 am
- Location: Minnesota
- Contact:
Re: New member in MN with BG-500
Looking at the schematic it shows a .1mfd/200v cap in parallel with the switch for the fuzzrite I believe. What kind of cap should I use for this and why is it needed?
- Nokie
- Top Producer
- Posts: 240
- Joined: Sun Jun 22, 2008 10:43 am
- Contact:
Re: New member in MN with BG-500
I have some info on the Mosrite Award BG-500 and BG-1000 amps at my site:
http://www.planktones.com/PageAward.html
and a video at
-Marty
http://www.planktones.com/PageAward.html
and a video at
-Marty
-
- Top Producer
- Posts: 678
- Joined: Tue Aug 19, 2008 12:15 pm
- Location: Chicago, IL
- Contact:
Re: New member in MN with BG-500
The cap across the switch is used to reduce the contact wear and to reduce the noise when the switch is activated. As I stated earlier this switch is turning on the power to a small relay, so there is actual power supply voltage on the switch terminals.
Any sort of cap can be used, I would guess that the original one was a ceramic disc, because it was cheap and it didn't need to be anything better. Just use whatever you can find that meets the specs.
Any sort of cap can be used, I would guess that the original one was a ceramic disc, because it was cheap and it didn't need to be anything better. Just use whatever you can find that meets the specs.
-
- New Member
- Posts: 5
- Joined: Mon Jun 22, 2015 8:55 pm
- Contact:
Re: New member in MN with BG-500
What kind of cap should I use for this and why is it needed?
sbobet333
sbobet333
-
- Top Producer
- Posts: 526
- Joined: Thu Jul 23, 2009 4:20 am
- Location: Central Coast USA (the Great Lakes) metro Chicago
- Contact:
Re: New member in MN with BG-500
'Recently became more interested in Mosrite amps; really enjoyed your playing, showing, stats, comparing.
Most enlightening, thank you for sharing the goodies and your skills.
'Been happily using small '65 Reissue Fenders with Mosrites, sometimes with an Electro-Harmonix Hum De-Bugger to wipe away the single-coil hum.
(There is a big sodium vapor streetlamp about 50 feet from the house and it "sings" to the guitar pickups.")
Most enlightening, thank you for sharing the goodies and your skills.
'Been happily using small '65 Reissue Fenders with Mosrites, sometimes with an Electro-Harmonix Hum De-Bugger to wipe away the single-coil hum.
(There is a big sodium vapor streetlamp about 50 feet from the house and it "sings" to the guitar pickups.")
- Sarah93003
- Master Contributor
- Posts: 3810
- Joined: Tue Mar 10, 2009 4:26 pm
- Location: Westlake Village, CA
- Contact:
Re: New member in MN with BG-500
Pics and detailed information or it didn't happen!! ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
____________________
1965 Mosrite Celebrity Prototype with Vibramute
1972 Mosrite Celebrity-III
1977 Gibson MK-53
1982 Fender Bullet
1994 Gretsch Streamliner G3155 Custom
2005 Gibson Les Paul Standard Plus
2006 Jude Les Paul 12 String
1965 Mosrite Celebrity Prototype with Vibramute
1972 Mosrite Celebrity-III
1977 Gibson MK-53
1982 Fender Bullet
1994 Gretsch Streamliner G3155 Custom
2005 Gibson Les Paul Standard Plus
2006 Jude Les Paul 12 String
Return to “Mosrite Amps & Accessories”
Who is online
Users browsing this forum: No registered users and 391 guests