1976 Mosrite Aluminum Rail Bass Prototype
- dorkrockrecords
- Master Contributor
- Posts: 1223
- Joined: Sun Jun 15, 2008 9:06 pm
- Location: Camden ME
- Contact:
1976 Mosrite Aluminum Rail Bass Prototype
There's been a decent amount of chatter surrounding this instrument, so it seems only right to post a more or less definitive thread here. I had known about its existence for a number years by way of Bill Gruggett who told me that a bass version of the Brass Rail guitar had been prototyped with aluminum for better balance / reduced weight, but ultimately this experiment met its demise in a factory dumpster. Apparently Bill's account was only half right. Whether fated for the dumpster or not, Semie gave this bass to a Mosrite investor who kept it safe for the next thirty-odd years. And now it's mine.
According to "Gruhn's Guide to Vintage Guitars: An Identification Guide for American Fretted Instruments" which confusingly lists four entries for the Brass Rail in its Mosrite section, a "Standard Bass" was shown at NAMM in 1977. I believe this to be that instrument.
Although the rail itself does appear gold through the yellowed clear coat, at the edges where the finish is chipped the aluminum color can be seen clearly. The pickups are extremely powerful humbuckers set in oversized wooden (or perhaps cardstock) surrounds with tortoise shell tops and brass rings. The two-piece maple neck has the standard Mosrite short scale length, but the sound is huge.
There is evidence that Mosrite did intend to make a Brass Rail bass as well, but to the best of my knowledge only a neck blank exists, and clearly neither of these instruments were put into production. Artie Niesen of Front Porch Music in Bakersfield, CA, has a similarly shaped bass in his collection with a standard adjustable trussrod neck and hardware, circa 1978, but the original greenburst finish is long gone.
Adam
- BRRanger
- Top Producer
- Posts: 645
- Joined: Tue Sep 18, 2012 10:14 am
- Location: California/Central Valley
- Contact:
Re: 1976 Mosrite Aluminum Rail Bass Prototype
Congratulations on your acquisition! A rare bird, indeed.
Scott
Scott
- LoveyX
- Top Producer
- Posts: 322
- Joined: Thu Jul 16, 2009 6:46 pm
- Location: Webster, New York
- Contact:
Re: 1976 Mosrite Aluminum Rail Bass Prototype
Adam,
That bass is quite a coup, probably one of a kind!
A couple questions if you care to discuss it anymore.
Did the neck stay straight as designed?
How is the action?
Thanks in advance.
That bass is quite a coup, probably one of a kind!
A couple questions if you care to discuss it anymore.
Did the neck stay straight as designed?
How is the action?
Thanks in advance.
- dorkrockrecords
- Master Contributor
- Posts: 1223
- Joined: Sun Jun 15, 2008 9:06 pm
- Location: Camden ME
- Contact:
Re: 1976 Mosrite Aluminum Rail Bass Prototype
Neck's straight, action's low.
- 101Volts
- Master Contributor
- Posts: 2488
- Joined: Sun Mar 01, 2009 10:33 pm
- Location: Pennsylvania, USA
- Contact:
Re: 1976 Mosrite Aluminum Rail Bass Prototype
Thanks for sharing, Adam. And now a question I'm not the only one to be thinking:
How's the sustain?
- Austin
How's the sustain?
- Austin
1966 Ventures II (German Carved, B670.)
1970s "Not a Blues Bender" Bodies: 2.
1976 Brass Rail Deluxe #10.
2013 Fender Pawn Shop Bass VI.
1970s "Not a Blues Bender" Bodies: 2.
1976 Brass Rail Deluxe #10.
2013 Fender Pawn Shop Bass VI.
- dorkrockrecords
- Master Contributor
- Posts: 1223
- Joined: Sun Jun 15, 2008 9:06 pm
- Location: Camden ME
- Contact:
Re: 1976 Mosrite Aluminum Rail Bass Prototype
101Volts wrote:Thanks for sharing, Adam. And now a question I'm not the only one to be thinking:
How's the sustain?
- Austin
Excellent. Tonally the bass sits in a range between Rickenbacker and Travis Bean.
-
- Master Contributor
- Posts: 1364
- Joined: Wed Jan 21, 2009 11:53 am
- Location: Md
- Contact:
- 101Volts
- Master Contributor
- Posts: 2488
- Joined: Sun Mar 01, 2009 10:33 pm
- Location: Pennsylvania, USA
- Contact:
Re: 1976 Mosrite Aluminum Rail Bass Prototype
dorkrockrecords wrote:101Volts wrote:Thanks for sharing, Adam. And now a question I'm not the only one to be thinking:
How's the sustain?
- Austin
Excellent. Tonally the bass sits in a range between Rickenbacker and Travis Bean.
I already know how the sustain is on one of the guitars even with a set of .10s. Does the bass have even more sustain? (I'd guess so.)
- Austin
1966 Ventures II (German Carved, B670.)
1970s "Not a Blues Bender" Bodies: 2.
1976 Brass Rail Deluxe #10.
2013 Fender Pawn Shop Bass VI.
1970s "Not a Blues Bender" Bodies: 2.
1976 Brass Rail Deluxe #10.
2013 Fender Pawn Shop Bass VI.
Return to “Mosrite Guitars & Basses Vintage USA”
Who is online
Users browsing this forum: No registered users and 146 guests