Broken Footswitch

User avatar
ZacJM
Top Producer
Posts: 211
Joined: Mon Apr 26, 2010 1:58 pm
Location: Texas
Contact:

Broken Footswitch

Postby ZacJM » Thu Jan 20, 2011 2:28 pm

I have one of these:

http://www.guitarcenter.com/Live-Wire-S ... 1323844.gc

According to all the reviews I found online they are supposed to be very durrable, I checked all over for a solution but I can't find any issues with it.
It worked for months but not it doesn't
If its plugged into my amp,the gain switches on, but I can't turn it off unless I unplug the footswitch.
I opened it up and theres no wires loose, so I'm not sure what the problem is. Anyone have any solutions? I'd hate to buy a new one, but I guess I can if I have too.
http://www.youtube.com/zacmoritz

Main instruments:
Wilson Bros. VM-100 Bogle Model
Reissue Epiphone Willshire
Marshall Mosfet 100 Reverb amp
Green Russian Fuzz Box
Cordovox Super V
Golden Cup Chromatic B-System

Mr. Bill
Top Producer
Posts: 678
Joined: Tue Aug 19, 2008 12:15 pm
Location: Chicago, IL
Contact:

Re: Broken Footswitch

Postby Mr. Bill » Thu Jan 20, 2011 3:15 pm

The switch turns on the distortion and won't turn it off until you pull the plug? Then the switch or the wire is shorted and will not turn off.

If you have a meter read the ohms or the continuity from tip to sleeve on the plug. I'd guess that it will read as a shorted connection. It could be a bad switch or a shorted wire in the cable. Only way to find out is by unhooking one wire from the switch.

User avatar
ZacJM
Top Producer
Posts: 211
Joined: Mon Apr 26, 2010 1:58 pm
Location: Texas
Contact:

Re: Broken Footswitch

Postby ZacJM » Thu Jan 20, 2011 7:21 pm

Mr. Bill wrote:The switch turns on the distortion and won't turn it off until you pull the plug? Then the switch or the wire is shorted and will not turn off.
.


Yeah just like that. I don't have a reader on me but I can take another look at it.

Anyone have any suggestions for really good durable switches that might not have this problem?
Or is this more of something that could happen to anything?
http://www.youtube.com/zacmoritz

Main instruments:
Wilson Bros. VM-100 Bogle Model
Reissue Epiphone Willshire
Marshall Mosfet 100 Reverb amp
Green Russian Fuzz Box
Cordovox Super V
Golden Cup Chromatic B-System

User avatar
Veenture
Master Contributor
Posts: 4127
Joined: Sat Jan 03, 2009 12:07 pm
Location: The Netherlands
Contact:

Re: Broken Footswitch

Postby Veenture » Fri Jan 21, 2011 3:19 am

ZacJM wrote:
Mr. Bill wrote:is this more of something that could happen to anything?
I once had a problem with a guitar cable that later proved to have one of its wires broken/damaged inside. I have no reader either; only by bending and twisting the cable (while it was 'on duty') I was lucky enough to be able to locate the general area where the breakage was but salvaging the cable meant having two short ones ...so I ended up buying a good quality cable with the desired length and it hasn't let me down once, in more than 10 years now :o (knock on wood :D )
Cables get trodden on etc. so they need to be flexible as well as durable. Good luck doing your 'Sherlock' bit! ;)

User avatar
Dennisthe Menace
Moderator
Posts: 4981
Joined: Mon May 05, 2008 8:40 pm
Location: Ft Lauderdale Florida
Contact:

Re: Broken Footswitch

Postby Dennisthe Menace » Fri Jan 21, 2011 10:31 am

Zac, make things simple. Go buy that identical footswitch and try it on your amp. If it works, then your original ftswtch is bad somewhere in the cable.
However if the same thing happens with the new switch, then the problem is in the amp.....it's not the news you might want to hear, but at least you
will know where the problem is..... ;)
make the Mos' of it, choose the 'rite stuff.
.........Owner of 9 Mosrites...
.....proud owner and documented:
1963 "the Ventures" Model s/n #0038
http://www.thevintagerockproject.com/

Mr. Bill
Top Producer
Posts: 678
Joined: Tue Aug 19, 2008 12:15 pm
Location: Chicago, IL
Contact:

Re: Broken Footswitch

Postby Mr. Bill » Fri Jan 21, 2011 10:45 am

Good point Dennis, it could be the amp I suppose.

The fast test, is plug in a guitar cable does the amp switch? Then touch the tip of the open end to the chassis. Does the amp switch now?

There are hundreds of footswitches out there. I guess, I prefer the ones that just have a jack on the back so that you can plug in your own cable to the amp.

User avatar
ZacJM
Top Producer
Posts: 211
Joined: Mon Apr 26, 2010 1:58 pm
Location: Texas
Contact:

Re: Broken Footswitch

Postby ZacJM » Fri Jan 21, 2011 5:09 pm

Mr. Bill wrote:Good point Dennis, it could be the amp I suppose.

The fast test, is plug in a guitar cable does the amp switch? Then touch the tip of the open end to the chassis. Does the amp switch now?

There are hundreds of footswitches out there. I guess, I prefer the ones that just have a jack on the back so that you can plug in your own cable to the amp.


When I just plugged the cable in, the amp switched the gain on. If the problem is in the amp, where would I find it. Is it an easy diy fix?
http://www.youtube.com/zacmoritz

Main instruments:
Wilson Bros. VM-100 Bogle Model
Reissue Epiphone Willshire
Marshall Mosfet 100 Reverb amp
Green Russian Fuzz Box
Cordovox Super V
Golden Cup Chromatic B-System

User avatar
Dennisthe Menace
Moderator
Posts: 4981
Joined: Mon May 05, 2008 8:40 pm
Location: Ft Lauderdale Florida
Contact:

Re: Broken Footswitch

Postby Dennisthe Menace » Sat Jan 22, 2011 5:38 am

MrBill wrote:There are hundreds of footswitches out there. I guess, I prefer the ones that just have a jack on the back so that you can plug in your own cable to the amp.
When I use my Ampeg GU-12 for smaller venues, I like using this:
Boss FS-5L Latching Footswitch (FS-5L)
ImageThis falls into the category that MrBill was referring to.... ;)

ZacJM wrote:When I just plugged the cable in, the amp switched the gain on. If the problem is in the amp, where would I find it. Is it an easy diy fix?
Well, that depends on the amp....What make, model, is it tube, solid state? All these things come into play when repairing an amplifier...... :|
make the Mos' of it, choose the 'rite stuff.
.........Owner of 9 Mosrites...
.....proud owner and documented:
1963 "the Ventures" Model s/n #0038
http://www.thevintagerockproject.com/

User avatar
ZacJM
Top Producer
Posts: 211
Joined: Mon Apr 26, 2010 1:58 pm
Location: Texas
Contact:

Re: Broken Footswitch

Postby ZacJM » Sat Jan 22, 2011 11:30 am

Solid State Marshall Mosfet 100 Reverb
Image
The foot switch plugs into that empty input on the front
Image

Image

Image

Image
http://www.youtube.com/zacmoritz

Main instruments:
Wilson Bros. VM-100 Bogle Model
Reissue Epiphone Willshire
Marshall Mosfet 100 Reverb amp
Green Russian Fuzz Box
Cordovox Super V
Golden Cup Chromatic B-System

Mr. Bill
Top Producer
Posts: 678
Joined: Tue Aug 19, 2008 12:15 pm
Location: Chicago, IL
Contact:

Re: Broken Footswitch

Postby Mr. Bill » Sat Jan 22, 2011 12:00 pm

Is the jack on the front a stereo jack, made to switch the channels and the reverb on and off?

If it is, you are using the wrong type of switch. You need a stereo dual switch with a stereo plug.

Edit:
Ok, I looked up the owners manual, and it is a stereo jack for a dual foot switch. The tip connection is for the channel switch, so if you don't care about the reverb, the mono pedal should work ok. When you plugged a guitar cable in did you try and short the tip to a metal part of the chassis?


Return to “Amp Tech Q&A and Repair Shop”

Who is online

Users browsing this forum: No registered users and 125 guests