I've let the glue dry overnight with the clamps on. I've drawn out the side profile and heading back to the bandsaw.
Shaping the head stock on the beltsander.
Now we're ready to carve the "M" on the top of thr head stock and drill for the tuning machines.
Shaping the fingerboard with a 10" radius-sanding block.
1 post • Page 1 of 1
- Top Producer
- Posts: 498
- Joined: Fri Jun 20, 2008 8:35 pm
- Location: Checotah, Oklahoma USA
Users browsing this forum: No registered users and 32 guests