mosriteforum.com

How difficult is it to remove and re-install the neck on the MK I? Are there a lot of adjustments that need to be made? Thanks.

Jack

kotadawg wrote:How difficult is it to remove and re-install the neck on the MK I? Are there a lot of adjustments that need to be made? Thanks.

Not difficult at all. First loosen all the strings then remove the neck pickup then remove the neck plate screws. Push the neck in towards the body (as some of them are tight due to the taper of the neck) then lift it straight up.

Simple enough. After re-installing, are there any adjustments that have to be made other than tuning? Thanks.