Page 1 of 1
Brass Rail Plans on PDF
Posted: Thu Mar 08, 2018 1:45 pm
by chad3006
In preparation for my next guitar project, I created a set of plans for a Mosrite style Brass Rail. The plans actually came from a Gruggett version of a Brass Rail. Anyway, I've found that printing the pdf in “poster” mode (prints on 12- 8.5” x 11” sheets of paper) and scaling it to 172% seems to come out just about right. It'll get you in the ball-park anyway, but certainly don't use the fret marks or anything like that, they aren't intended to be that accurate.
download link:
https://www.dropbox.com/s/v9f24czxr8fc9 ... l.pdf?dl=0
Re: Brass Rail Plans on PDF
Posted: Sun Mar 11, 2018 8:33 pm
by Sarah93003
Thanks for posting that !
Re: Brass Rail Plans on PDF
Posted: Tue Apr 24, 2018 7:08 am
by 101Volts
I'm thankful too. This post also helped me realize the Brass Rail, Bluesbender and S.M. models all use the same body; the S.M. models aren't carved, though.
- Austin
Re: Brass Rail Plans on PDF
Posted: Fri May 04, 2018 9:01 am
by panther
Can someone explain the term Brass Rail ?
I also notice the diagram has no zero fret.
Dan
Re: Brass Rail Plans on PDF
Posted: Sat May 05, 2018 4:55 pm
by 101Volts
panther wrote:Can someone explain the term Brass Rail ?
I also notice the diagram has no zero fret.
Dan
The Brass Rail Guitar gets its name from the neck which has a square rod of brass in the middle of it. There's no truss rod and there are no fret slots in the rod, instead there are little notches for the fret tangs.
- Austin
Re: Brass Rail Plans on PDF
Posted: Thu Dec 06, 2018 7:11 pm
by 101Volts
101Volts wrote:I'm thankful too. This post also helped me realize the Brass Rail, Bluesbender and S.M. models all use the same body; the S.M. models aren't carved, though.
- Austin
I have to correct myself here: the Blues Bender and Brass Rail do NOT necessarily use the exact same body although they're similar.
Brass Rail:
Uses Wenge wood;
Although I can't speak for all Brass Rails, mine has a slightly different body shape on the upper part by the neck (seems that it's
like a Blues Bender that has part of the body cut off and smoothed over.)
- Austin