sure I can understand that. on my guitar versions, the 350 model i have the pickups were wound to about 10k for each pickup, my v II models were 5.5 or so, but ran in parallel. also a small note, the VII versions had the screw hole on the pickup cover drilled big enough so the whole screw could go all the way into the pickup, but the 350 model I have, the holes were drilled just big enough so the threaded part of the screw could go in, but not the head. I personally didnt like this because when the screw was tighten down if caused warp in the plastic cover, so i modded my own so the screw head would go all the way through. not sure if this infomation is any use to you, but hey, there it is.
