here I am marking the exact correct placement of the bridge and tailpiece. since I was already doing some work on my other mosrite, i removed the neck to attach to the guitar body to ensure correct placement before I went any further. I played just fine.
The Sharkfin Shall Rise Again.....
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
after shaping the headstock and drilling the tuner holes I began routing out the truss rod channel and put together the truss rod.
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
after cutting the fret slots I drilled out the holes for the dot inlay
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- MWaldorf
- Site Admin
- Posts: 3264
- Joined: Sat May 24, 2008 1:21 pm
- Location: Alameda, California
- Contact:
Re: The Sharkfin Shall Rise Again.....
Cool project!
Oy vey - it's MESHUGGA BEACH PARTY - The world's premier Jewish Surf Music Band!
What? Couldn't tell the logo is a link? So click here, what's the hold up? http://www.meshuggabeachparty.com
What? Couldn't tell the logo is a link? So click here, what's the hold up? http://www.meshuggabeachparty.com
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
and I began to buff the tailpiece. this was much easier to do then I thought it might be. and here I am woulding a prototype of the pickup that will eventually go in the guitar
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
painting the tailpiece.
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
after slotting the fingerboard and drilling the inlay holes I sanded the board down again to rove a few mistakes I made cutting the fret slots where the saw jump on me. I was then ready to install the mother of pearl dots.
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
most luthiers will probably use epoxy to glue in inlay, but i didnt have any at the time. so i use regular old titebond. using powdered dyes (mohawk brand) i mixed it into the glue to match the color of the rosewood. I then begain installing the dots. afterwards i use the extra glue to pile onto the fingerboard so if the glue drops down it still will completely fill the hole.
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: The Sharkfin Shall Rise Again.....
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”
Who is online
Users browsing this forum: No registered users and 227 guests