![Laughing :lol:](./images/smilies/icon_lol.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
pics stolen from hallmark site
i am hesitate beetween 59 model
![Image](http://i49.servimg.com/u/f49/15/99/09/81/5910.jpg)
and the 60
![Image](http://i49.servimg.com/u/f49/15/99/09/81/6010.jpg)
this one is really beautifull
![Image](http://i49.servimg.com/u/f49/15/99/09/81/img_1710.jpg)
for the body i have a basswood blank (ithis blank may be first a télé, after a mustang an then now it will be a mosrite
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
need to glue an hear cause it is little short in larger
![Image](http://i49.servimg.com/u/f49/12/69/41/08/imgp0178.jpg)
i have find this pdf for a mosrite is it the same size than the one i want ? (with the slanted pick up)
it have a thickness of 45 mm at this time, but it will be less after some planing cause i have suck when i glue it! my clamps have made one part go a 1 mm highter than the other
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
for the neck
i have some rosewood for the fretboard
and some mapple to make the neck but i haven't big blank like EFElliott use to make one piece ,my thickest is 35mm or 1, 37 inch then i think i will have to glue a headstock after a 7° cut or do a laminated
for the heel if i made a screweed neck it will be ok but if i want to glue it i will need to glue another piece of wood to have the mosrite tenon
for the nut i have seen in the topic of EFElliott the 0 fret and the nut fret it is really good idea and so easy ,and it will avoid to find a rare part i think
for the pups i don't know what to put ? i have time for that before i must find the more harder the trem
![Wink ;)](./images/smilies/icon_e_wink.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)