Ok, here's one for you more experienced Mosrite guys.
When you remove the Mosley tailpiece, what's underneath the metal plate? Is the body flat under there with no routing? Are there threaded inserts that go into the body for the bridge height adjustment screws or is all in the plate?
Just wondering.
Mosley Tremolo Question
-
- Top Producer
- Posts: 678
- Joined: Tue Aug 19, 2008 12:15 pm
- Location: Chicago, IL
- Contact:
- dubtrub
- Administrator
- Posts: 3795
- Joined: Sun May 04, 2008 10:12 am
- Contact:
Re: Mosley Tremolo Question
There is no routing, the body is flat and there are no inserts. At least on the American made Mosrite. I've never worked on an import one. The plate is tap threaded Also you will find a hole bored from under the plate into the control cavity for the grounding wire.
Danny Ellison
-
- Top Producer
- Posts: 678
- Joined: Tue Aug 19, 2008 12:15 pm
- Location: Chicago, IL
- Contact:
Re: Mosley Tremolo Question
Danny, thanks for the info!
Do the bridge studs go beneath the plate into the top of the body or only up above the plate?
Do the bridge studs go beneath the plate into the top of the body or only up above the plate?
- dubtrub
- Administrator
- Posts: 3795
- Joined: Sun May 04, 2008 10:12 am
- Contact:
-
- Top Producer
- Posts: 678
- Joined: Tue Aug 19, 2008 12:15 pm
- Location: Chicago, IL
- Contact:
Re: Mosley Tremolo Question
Danny: Thanks!
Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”
Who is online
Users browsing this forum: No registered users and 456 guests