![Wink ;)](./images/smilies/icon_e_wink.gif)
Bass Time!
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: Bass Time!
just wondering if you remembered to tape off the neck pocket before spraying? ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- oigun
- Top Producer
- Posts: 437
- Joined: Thu Jan 07, 2010 3:48 pm
- Location: Netherlands
- Contact:
Re: Bass Time!
oipunkguy wrote:just wondering if you remembered to tape off the neck pocket before spraying?
Nope. The pocket was really tight but there is only a little paint coming in the neckpocket so when I use 2k I dont bother.
When using nitro I tape it off for sure becaus it can cause problems later when removing the neck.
Ok, wood on wood for better tone etc.... that discutable
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- oigun
- Top Producer
- Posts: 437
- Joined: Thu Jan 07, 2010 3:48 pm
- Location: Netherlands
- Contact:
Re: Bass Time!
yesterday I plated the last parts. Unfortunately the nicckel platong on the unplated knobs will not work. Plating potmetal is a different process and I have to figure out the right steps..
I had to make some changes on the bridgeplate so I replated that.The surface rust is from the acid dip wich I didnt rine properly so I had to do that again.
![Image](http://www.mijnalbum.nl/GroteFoto-7EWVNFLT.jpg)
![Image](http://www.mijnalbum.nl/GroteFoto-AFQOZKQP.jpg)
The body is attached to the neck and I did some spit&polish
![Image](http://www.mijnalbum.nl/GroteFoto-RPKEG7CR.jpg)
Also made the stringguide, the tunerbushings came out great!
![Image](http://www.mijnalbum.nl/GroteFoto-LYJWKKAC.jpg)
I had to make some changes on the bridgeplate so I replated that.The surface rust is from the acid dip wich I didnt rine properly so I had to do that again.
![Image](http://www.mijnalbum.nl/GroteFoto-7EWVNFLT.jpg)
![Image](http://www.mijnalbum.nl/GroteFoto-AFQOZKQP.jpg)
The body is attached to the neck and I did some spit&polish
![Image](http://www.mijnalbum.nl/GroteFoto-RPKEG7CR.jpg)
Also made the stringguide, the tunerbushings came out great!
![Image](http://www.mijnalbum.nl/GroteFoto-LYJWKKAC.jpg)
- oigun
- Top Producer
- Posts: 437
- Joined: Thu Jan 07, 2010 3:48 pm
- Location: Netherlands
- Contact:
Re: Bass Time!
Polished up the tuners and reamed the bushings for a perfect fit.
![Image](http://www.mijnalbum.nl/GroteFoto-URPUENSN.jpg)
![Image](http://www.mijnalbum.nl/GroteFoto-U8R64NTC.jpg)
![Image](http://www.mijnalbum.nl/GroteFoto-URPUENSN.jpg)
![Image](http://www.mijnalbum.nl/GroteFoto-U8R64NTC.jpg)
- Sarah93003
- Master Contributor
- Posts: 3810
- Joined: Tue Mar 10, 2009 4:26 pm
- Location: Westlake Village, CA
- Contact:
Re: Bass Time!
That looks awesome!
____________________
1965 Mosrite Celebrity Prototype with Vibramute
1972 Mosrite Celebrity-III
1977 Gibson MK-53
1982 Fender Bullet
1994 Gretsch Streamliner G3155 Custom
2005 Gibson Les Paul Standard Plus
2006 Jude Les Paul 12 String
1965 Mosrite Celebrity Prototype with Vibramute
1972 Mosrite Celebrity-III
1977 Gibson MK-53
1982 Fender Bullet
1994 Gretsch Streamliner G3155 Custom
2005 Gibson Les Paul Standard Plus
2006 Jude Les Paul 12 String
-
- Active Member
- Posts: 51
- Joined: Thu Jul 01, 2010 1:06 pm
- Location: Netherlands
- Contact:
Re: Bass Time!
smokin'hot
- oipunkguy
- Master Contributor
- Posts: 2208
- Joined: Tue Jul 22, 2008 1:05 am
- Location: Winchester, Virginia
- Contact:
Re: Bass Time!
sweeeeeetttt! ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Cheers,
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
Aaron
Facebook.com/aarons.guitars
"Politicians are like diapers; they need to be changed often and for the same reason."
— Mark Twain
- Veenture
- Master Contributor
- Posts: 4127
- Joined: Sat Jan 03, 2009 12:07 pm
- Location: The Netherlands
- Contact:
Re: Bass Time!
Really cool...and the (darker) blue finish is absolutely gorgeous after all. The surface is so beautifully smooth...professional job man!
http://www.mijnalbum.nl/GroteFoto-RPKEG7CR.jpg
![Shocked :shock:](./images/smilies/icon_eek.gif)
http://www.mijnalbum.nl/GroteFoto-RPKEG7CR.jpg
- oigun
- Top Producer
- Posts: 437
- Joined: Thu Jan 07, 2010 3:48 pm
- Location: Netherlands
- Contact:
Re: Bass Time!
Today I finished the pickup. And corrected the headstock the tunerholes were not evenly spaced towards the edge. So I sanded 2mm of one side (otherwise it will haunt me)
Installed heightbar and drilled the holes in the ring.
Just for fun I put on every part the cerialnumber![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Image](http://www.mijnalbum.nl/GroteFoto-KXAPCNM4.jpg)
![Image](http://www.mijnalbum.nl/GroteFoto-WWTZMY7E.jpg)
Scratchplate mint or aged white?..... Its gonna be AW
![Image](http://www.mijnalbum.nl/GroteFoto-GVF4FXOM.jpg)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Installed heightbar and drilled the holes in the ring.
Just for fun I put on every part the cerialnumber
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Image](http://www.mijnalbum.nl/GroteFoto-KXAPCNM4.jpg)
![Image](http://www.mijnalbum.nl/GroteFoto-WWTZMY7E.jpg)
Scratchplate mint or aged white?..... Its gonna be AW
![Image](http://www.mijnalbum.nl/GroteFoto-GVF4FXOM.jpg)
- Veenture
- Master Contributor
- Posts: 4127
- Joined: Sat Jan 03, 2009 12:07 pm
- Location: The Netherlands
- Contact:
Re: Bass Time!
Wow, it's like Mosrite is being manufactured in Holland...
We're proud of you oigun. If I had the money, I'd ask you to make a guitar for me, if you were willin'![Wink ;)](./images/smilies/icon_e_wink.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
We're proud of you oigun. If I had the money, I'd ask you to make a guitar for me, if you were willin'
![Wink ;)](./images/smilies/icon_e_wink.gif)
Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”
Who is online
Users browsing this forum: Bing [Bot] and 369 guests