Set #7 Sawing neck profile & drilling tuning peg holes
Posted: Sat Jan 31, 2009 8:29 pm
I've let the glue dry overnight with the clamps on. I've drawn out the side profile and heading back to the bandsaw.
Shaping the head stock on the beltsander.
Now we're ready to carve the "M" on the top of thr head stock and drill for the tuning machines.
Shaping the fingerboard with a 10" radius-sanding block.
Shaping the head stock on the beltsander.
Now we're ready to carve the "M" on the top of thr head stock and drill for the tuning machines.
Shaping the fingerboard with a 10" radius-sanding block.