Set #3 Routing the body blanks
Posted: Sat Jan 31, 2009 8:29 pm
Attaching the profile Jig.
Routing the profile on the pin router.
Well, all four bodies are profiled to shape. Next I'm going to take my trusty Sears and Roebuck
hand router and route a cove cut, and then the binding slot around the tops of the bodies.
Now back to the pin router to rout the neck pocket and control cavity.
Routing the profile on the pin router.
Well, all four bodies are profiled to shape. Next I'm going to take my trusty Sears and Roebuck
hand router and route a cove cut, and then the binding slot around the tops of the bodies.
Now back to the pin router to rout the neck pocket and control cavity.