pickups heights

brunob
Senior Member
Posts: 112
Joined: Sat Aug 23, 2008 9:36 am
Location: Italy
Contact:

pickups heights

Postby brunob » Fri Mar 20, 2009 8:20 am

I just received the Mosrite Ranger Deluxe after 6/7 months.....and don't know about those pickups,can you advise me to the "right" heights,On my Fenders all pickups are at 3 mm(metric),but with those pickups ?
thanx 4 cooperation
Bruno :twisted:

brunob
Senior Member
Posts: 112
Joined: Sat Aug 23, 2008 9:36 am
Location: Italy
Contact:

Re: pickups heights

Postby brunob » Sun Mar 22, 2009 3:09 am

it sounds good(I put them a little higher 'couse I love that "early Ventures" aggressive sound,but if I bend at 15-17 fret a very thin sound comes out from the e string(0.10) ,any suggestion?
it's all new 4 me,comin' from 65 Jaguar&jazzmaster with 0.11 strings.
nice sounding guitar,after 1 hour playing,loose the arm......................................
Bruno :roll:

User avatar
gplayer
Top Producer
Posts: 433
Joined: Sat Dec 27, 2008 4:36 am
Location: Fl
Contact:

Re: pickups heights

Postby gplayer » Sun Mar 22, 2009 7:05 am

Could be a high fret..or you may need to raise the bridge just a skosh...ne?

brunob
Senior Member
Posts: 112
Joined: Sat Aug 23, 2008 9:36 am
Location: Italy
Contact:

Re: pickups heights

Postby brunob » Mon Mar 23, 2009 5:29 am

ok,I raised the pickups to a sound I like,,and set the strings too ,but there's a problem with the neck I think.
The e string and b string doesn't sound after the 11 fret if i bend them (they sounds thin not natural there's no string vibration) :evil: (I checked it now without the amp),so I think there's something about the truss rod.
I raised 2 turns the bridge ,but still the same.
Gonna ask a liuther in town.
Bruno


Return to “Mosrite & Clone, Projects, Parts & Accessories Q&A”

Who is online

Users browsing this forum: No registered users and 63 guests