Page 1 of 2

Custom Mosrite

Posted: Sun Mar 01, 2009 12:31 pm
by KRamone27
If you could have a custom built Mosrite made for you what would you want in it?
Body: Wood and routing options
Neck: Wood, fretboard wood, fret size, custom inlay etc..
Pickups: Any kind
Electronics:
Pickguard setup:
Bridge: Tremolo, hardtail
Misc. hardware:

Re: Custom Mosrite

Posted: Sun Mar 01, 2009 8:54 pm
by Dennisthe Menace
Kevin posted:
If you could have a custom built Mosrite made for you what would you want in it?

Body: ALDER
Neck: MAPLE, INDIAN BRAZILIAN ROSEWOOD, MEDIUM JUMBO FRETS
Pickups: SPLIT-COIL MOSRITE HUMBUCKERS
Electronics: 1 MASTER VOL, 1 MASTER TONE, each at 500K w/Push/Pull for Coil Splitting
Pickguard setup: STANDARD MOSRITE P'GUARD SET UP
Bridge: MOSRITE ROLLER BRIDGE w/Lock Down BRIDGE POSTS
Misc. hardware: VIBRAMUTE w/LITE GAUGE SPRING, SPERZEL LOCKING TUNERS, SCHALLER STRAP LOCKS

........................how's that??? :mrgreen: ................

Re: Custom Mosrite

Posted: Sun Mar 01, 2009 9:13 pm
by dubtrub
I'd want Semie to build me this '59 Joe Maphis model. Course I would want it built in 1959, not a reissue. ;)

Image

Re: Custom Mosrite

Posted: Mon Mar 02, 2009 12:09 am
by MWaldorf
besides wanting what both Danny and Dennis described, I'd want a sunburst sidejack with a vibramute (with mute!), and three pickups. And, of course, speed frets!

Re: Custom Mosrite

Posted: Mon Mar 02, 2009 9:03 am
by Strat-o-rama
My baritone/standard doubleneck-Joe Maphis early solid body style.(Bari:30 in scale, standard:24 and 3 quarters)
Body-select lightweight swamp ash. Finished in nitrocellulose laquer sunburst-same color as Larry Collins' '88
Sidejack w. triple style binding (like the early JM solids)
Frets-vintage, like Fender
Nut width-same as Fender "B" on both necks.
Necks_ maple set neck with Indian rosewood fretboard

Re: Custom Mosrite

Posted: Mon Mar 02, 2009 12:56 pm
by KRamone27
Mine you be as follows.
Body: Ventures style with c/b/c binding, routed for one pickup. Finished in nitrocellulose green metal flake.
Neck: Set maple with modern C neck profile, rosewood fretboard with my name inlaid and c/b/c binding, medium frets.
Pickups: One mosrite pickup
Electronics: CTS pots and sprauge caps switchcraft jack.
Pickguard set up: 1 volume and 1 tone cream pickguard.
Bridge: Mosely tremolo with roller bridge.
Misc, Hardware: Grover tuners, bone nut, spun mosrite knobs, ernie ball super slinky strings.

Re: Custom Mosrite

Posted: Mon Mar 02, 2009 1:45 pm
by gplayer
An off-the-shelf '63 Sidejack, in "like new" condition, would work for me. ;)

Re: Custom Mosrite

Posted: Mon Mar 02, 2009 7:09 pm
by brutus
mine would have to a 1966 double neck red with black pick ups and tortoise pick guard. hum-bucking pick-ups on the 6 string and single-coils on the 12 string and red head stocks black logo... plus the boost buttons, and coil splitter buttons.........darn that sounds awesome

Re: Custom Mosrite

Posted: Mon Mar 02, 2009 8:02 pm
by FritzCat
I want a new one just like this!

Image

Re: Custom Mosrite

Posted: Tue Mar 03, 2009 5:43 am
by sleeperNY
Danny: How long ago did you get that pic of Joe Maphus and his Mosrite? I have looked at a couple of times here before I realized where it came from. That store is located about 20 minutes away from me. They have some great guitars there but almost all are priced out of my reach.

Jim