On the chopping block is my 72 bass. Some of you may recall I got this guitar with a non working truss rod. After several attempts to get the truss operational enough to remove the excessive relief, I finally replaced the rod with a new dual action rod. Although it has the cover for the headstock adjustment, it now only adjust from the rear via an Allen wrench. The neck has been perfectly true since replacing the rod two years ago. Everything else is all original and untouched. The finish is in nice shape with only a few chips along the edge and on the headstock. I can take more photos if need be. Also I'll add that it seems to be a bit on the heavy side. No case.